How To Get List Of Drawings Projectwise

Attribute mapping is the linking of selected source attributes to selected destination attributes, for the purpose of copying attribute values from i certificate to another when documents are published to or opened from ProjectWise. Attribute mappings are stored in attribute mapping definitions within the advanced integration project.

In that location are two types of attribute mapping definitions you lot tin can create:

environs mapping (Revit-to-ProjectWise) - This is the mapping of Revit document backdrop (source attributes) to ProjectWise surround attributes (destination attributes). Create this type of aspect mapping definition if yous are publishing or eTransmitting documents to ProjectWise and yous desire sure Revit certificate properties values to be carried over to the respective environment attributes on the new documents that get created as a result of the publishing or eTransmitting.
project mapping (ProjectWise-to-Revit) - This is the mapping of custom piece of work area attributes and/or ProjectWise projection properties (source attributes) to Revit document backdrop (destination attributes). Create this blazon of aspect mapping definition if yous are opening or eTransmitting (or detaching from central) Revit documents (stored in ProjectWise) from a particular work in progress folder and you want certain Revit document backdrop within the Revit document to be populated with the values from the respective custom work surface area attributes (based on assigned piece of work expanse blazon) and/or ProjectWise project properties.

Create an Environment Mapping and Assign It to a Location

To employ surround mapping, starting time you create an attribute mapping definition that maps the selected source and destination attributes, and then you assign the attribute mapping definition to a new or existing publish location, family publish location, or eTransmit location. When yous employ that location to publish or eTransmit, the selected source attribute values will exist copied over to the mapped attributes on the new document(s) that get created in ProjectWise as a result of the publishing or eTransmitting.

To utilize a simple example, suppose that yous want to publish a canvass in the current Revit model to a DWG certificate in ProjectWise, and you need the new DWG document in ProjectWise to have the same Fatigued Past attribute value as the original Revit sail from which the DWG was created. To accomplish this, start y'all create an attribute mapping definition in the project that maps the source Drawn By property in Revit to the destination Drawn By attribute in ProjectWise, then you assign that attribute mapping definition to the publish location you volition use to publish the Revit sheet to DWG. When you finally publish the sheet, the value of the source Drawn By holding (for example, John.Smith) will be copied to the destination Drawn By attribute on the published DWG document.

Different operations require different attribute mappings, therefore y'all will need to create different attribute mapping definitions for each of the following location types:

publish location
family unit publish location
eTransmit location

In other words, the attribute mapping definition you create for one type of location should non be assigned to whatever other blazon of location. Also, yous might need to create more than 1 attribute mapping definition for a particular location type (for example, if you have two publish locations, and each publishes to a different ProjectWise binder, and the destination folders have different environments assigned).

Open the Revit project or family unit that contains the source attributes you lot want to map:
- If this surroundings mapping is to be assigned to a publish location or an eTransmit location, open a Revit projection.
- If this surroundings mapping is to exist assigned to a family unit publish location, open up a Revit family.
This determines which source attributes will be available in the environment mapping form.
Open your project in the ProjectWise browser.
Correct-click Environment Mappings and click Create.

The Document Attributes to Environment mapping dialog opens.
In the Mapping Name field, enter a name for the attribute mapping definition.

From the Source attribute set list, select the object in the current Revit project or family that contains the source attributes you want to map.

The object you lot select depends on whether the current document is a Revit project or family, and which type of location it volition be assigned to:

If the current document is:	and you program to assign this attribute mapping definition to:	then select:
a Revit project	a publish location	a view or sheet from the list
a Revit project	an eTransmit location	the model from the list
a Revit family	a family publish location	the family unit from the list

The backdrop of the selected object are listed in the Document Attribute name cavalcade (these are the source attributes).

From the Target Environs list, select the ProjectWise environs containing the attributes you want to map to (these are the destination attributes).
The Target Surroundings list contains the environments that exist in the current ProjectWise datasource (the datasource containing the advanced integration project).
In the Document Attribute name column, find the source attribute yous want to map, then double-click the empty field next to it (in the Environs Aspect name cavalcade) and select the ProjectWise environment attribute that you lot want to map the source attribute to.
Map additional attributes every bit needed and click OK when finished.

The aspect mapping definition is added to the Environment Mappings binder in the projection.

You tin at present assign this attribute mapping definition to a publish location, family publish location, or eTransmit location.

Create a new or open up an existing publish location, family unit publish location, or eTransmit location.
If you are creating a location, make sure you ready the Part accordingly (Publish Location, Family Publish Location, or eTransmit Location), and then click the ProjectWise button to select a destination folder in ProjectWise.
In the Create Location or Location Backdrop dialog, from the Mapping list, select the attribute mapping definition you configured for this location.
(If this list is empty, information technology ways there are no attribute mapping definitions in this project under the Environment Mappings folder.)

Important: Brand sure the destination folder (binding) of this location and the selected attribute mapping definition are both using the same environment. The Surround field shows the proper noun of the environment that is assigned to the destination folder. To make information technology easy to tell which mapping uses which surroundings, each attribute mapping definition in the listing displays the proper name of the surroundings information technology uses, grayed out and to the right of the mapping proper name.
Click OK.

The side by side time yous employ this location to publish, family publish, or eTransmit, source aspect values will exist copied over to the mapped destination attributes on the new document(s) that go created as a upshot of the publishing or eTransmitting.

Create a Project Mapping and Assign It to the 'Work in progress' Binder

Open the Revit projection document that contains the destination attributes you want to map to.
This determines which destination attributes will be bachelor in the attribute mapping class.
Open your project in the ProjectWise browser.
Right-click Project Mappings and click Create.

The Project Attributes to Document mapping dialog opens.
In the Mapping Proper name field, enter a name for the attribute mapping definition.
Define the available source attributes by creating one or more source aspect lists.
Each source attribute listing can be linked to a work area, a ProjectWise projection, or both.
1. Click the Create new source attributes push button.
  
  The Project Attribute Source dialog opens.
2. Enter a name for the source attribute listing you lot are creating.
3. If you want this source attribute list to get attributes from a particular work expanse, click the Browse (...) button side by side to the Work Area field and select the work area you lot want to use.
4. If you lot want this source attribute list to get attributes from a particular ProjectWise project, click the Scan (...) button adjacent to the ProjectWise Project field and select the ProjectWise project you want to use.
  The custom attributes of the selected piece of work surface area and/or the backdrop of the selected ProjectWise projection display in the aspect list (these are the source attributes).
  
  If the selected piece of work area is already associated to a ProjectWise project, then that ProjectWise projection is automatically selected here.
5. Click OK.
The new source aspect list is added to the Source list of the Project Attributes to Document mapping dialog. Echo these steps to create more source attribute lists as needed.
From the Source list, select the source attribute list want to use.
From the Target list, select the Model (this contains the destination attributes).
In the Project Attribute proper noun column, find the source aspect you want to map, then double-click the empty field adjacent to it in the Document Attribute name column, select the Revit property that yous want to map the source attribute next to.
Map additional attributes as needed and click Save when finished.

The attribute mapping definition is added to the Project Mappings listing in the projection.

Yous tin can now assign this attribute mapping definition to the default Work in progress folder (or any working folder) in the project.

Right-click the Work in progress folder (or whatever working folder) and select Backdrop.
The Location Properties dialog opens.
From the Mapping listing, select the attribute mapping definition you configured for this working binder.
(If this list is empty, it means in that location are no attribute mapping definitions in this project under the Projection Mappings folder.)

To the right of each aspect mapping definition name, and grayed out, is the name of the Revit file that was used to configure the destination attributes of that attribute mapping definition.
Click OK.

Finally, turn on the following project settings to brand sure your Revit document attributes get updated when you want them to:

Open the backdrop of this advanced integration project.
Turn on these settings:
- Update cartoon attributes on - Document open
- Update drawing attributes on - Document eTransmit
(encounter Project Properties and Settings)
Click OK.

Once all this is configured, the next time you open or eTransmit or disassemble from central a Revit certificate that is stored in ProjectWise from this Work in progress folder, the mapped Revit document properties (destination attributes) within the document will be populated with the values from the corresponding custom piece of work area attributes and/or ProjectWise project properties (source attributes).

Import an Aspect Mapping Definition from Some other Projection

Consign the attribute mapping definition from the current projection:
1. In the ProjectWise browser, open the project that contains the original attribute mapping definition.
2. Expand Environment Mappings or Project Mappings.
3. Right-click an attribute mapping definition and select Consign.
  The Save Document As dialog opens, prompting you lot to save the selected attribute mapping definition to a mapping file (.docmap for environment mappings, .projmap for project mappings) and store it in the current datasource (the datasource that the current projection is stored in).
4. Select the ProjectWise folder to save the mapping file to, or click Save to disk to save the mapping file to a local folder.
Import the exported attribute mapping definition into another project:
1. In the ProjectWise browser, open some other project.
2. Correct-click Environment Mappings or Project Mappings (depending on which type of mapping yous are importing) and select Import.
3. Select the previously exported mapping file in ProjectWise and click Open up, or click Open up from Disk if yous exported the mapping file to a local folder.
The attribute mapping definition is added to the project under the selected mapping folder.